92 P Mode Programming SPS-2000 Program Manual v1.30
3. Once PLUs are added they will be displayed as a list on the screen:
Each Column of PLU data is described in the table below:
Column Explanation
GROUP Touch a GROUP in the group selection box to display the PLUs that are linked to the
group. Use the arrow up (↑) or arrow down (↓) keys at the bottom of the box to view
Groups 1-16 or 17-32.
PLU# This is field display only and cannot be edited. Use the check box to the left of the PLU
number to select the PLU for editing. PLUs assigned to group 1 will begin with PLU
#1001 and range to PLU #1999; PLUs assigned to group 2 will range from 2001-2999,
etc.
DESCRIPTOR Touch the current descriptor button to edit the descriptor field.
STOCK
Select a PLU and touch STOCK to set the stock level for the PLU.
STOCK
KP
Touch STS GRP and/or STOCK buttons to toggle from NO to YES. The YES/NO
status determines the status group to which the PLU is assigned:
PLUs with option NO STOCK and NO KP are linked to PLU STATUS
GROUP #1.
PLUs with option STOCK and NO KP are linked to PLU STATUS GROUP
#2.
PLUs with option NO STOCK and KP are linked to PLU STATUS GROUP
#3.
PLUs with option STOCK and KP are linked to PLU STATUS GROUP #4.
PRICE Touch the current price button to edit the price field.
When more than 10 PLUs are displayed on the screen, use the arrow up (↑) or arrow down (↓)
keys at the bottom of the screen to view additional PLUs.
Touch CLOSE to exit (after v3.00c touch MAKE MENU) the PLU QUICK REGISTRATION
PROGRAM. You will be prompted: “DO YOU WANT TO MAKE A MENU SCREEN?” If
you select YES, new menu screens will be created automatically based upon the group and PLU
data you have programmed.
Group List
Box
PLU Selection
Check Box
To Next Page
Loading...
Need help?
General
