Samsung RT4401-48A - New and Changed Information; Revision History; Organization of this Document; Related Documentation

Preface
RT4401-48A Installation Manual v3.0 xi
Copyright © 2019, All Rights Reserved.
New and Changed Information
This section describes information that has been added/changed since the previous
publication of this manual.
 The 'Installation' section and the 'Power Supply Connection' section of
Personal and Product Safety is updated.
Revision History
The following table lists all versions of this document.
Document Version
Publication Date
Remarks
1.0
January 2019
First version
2.0
January 2019
-
3.0
February 2019
-
Organization of This Document
Section
Title
Description
Chapter 1
Before Installation
This chapter introduces RRH and describes items
should be understood before installation.
Chapter 2
Installing System
This chapter describes the procedures to install
the RRH.
Chapter 3
Connecting Cables
This chapter describes the procedures to connect
the cables to the RRH installed.
Chapter 4
Inspect the Installation
This chapter describes the procedures of
inspecting installation status after RRH
installation and cabling is completed.
Appendix A
Acronyms
This annex describes the acronyms used in this
manual.
Appendix B
Clean the Optical Connectors
This annex describes the procedure of cleaning
the optical connector and cleaning tool.
Appendix C
Standard Torque
This annex describes the standard torque when
fastening the bolt.
Related Documentation
 LTE eNB System Description