Samsung RT4401-48A - Figure 31. Fixing RRH on the Pole (2)

Chapter 2 Installing System
RT4401-48A Installation Manual v3.0 33
Copyright © 2019, All Rights Reserved.
Figure 31. Fixing RRH on the Pole (2)
When installing the RRH, the tilting angle pointer of the unit bracket should point
to 0°.
3 Check the tilt and the azimuth using the RF alignment tool, and adjust when
there is an issue.
For detailed instructions of how to use the RF alignment tool, refer to the user
manual per manufacturer.
[Angle pointer position for unit bracket with
0° tilt when installing the RRH]
Tilting angle scale of the unit bracket
M8 Hex. Bolt
(Washer Assembly)
1
2