Chapter 2 Installing System
RT4401-48A Installation Manual v3.0 56
Copyright © 2019, All Rights Reserved.
according to the pole diameter.
Fixing Mounting Bracket for 3 Sector
To fix the mounting bracket on the pole, do the following:
Prerequisites
Before proceeding with fixing the mounting bracket 3 sector pole type, make sure
that you have the items mentioned in the table below:
Table 20. Parts and Tools for Fixing Mounting Bracket on the Pole
Torque Driver (20 to 90 lbfin)
Screw Driver Bit ('+', No. 3)
Antenna Alignment Tool
1 Pass the steel band through the fixing hole of the mounting brackets.
To Next Page
Loading...
