Samsung RT4401-48A - Figure 29. Lifting RRH; Table 8. Parts and Tools for Fixing RRH on the Pole

Chapter 2 Installing System
RT4401-48A Installation Manual v3.0 31
Copyright © 2019, All Rights Reserved.
When poor leveling happens, adjust the position of fasteners used to fix the
mounting bracket.
After fixing the steel band, push the remainder of band inside the mounting
bracket.
Lifting RRH
To lift the RRH, do the following:
Lift the RRH with a cherry picker.
Figure 29. Lifting RRH
Fixing RRH on the Pole
To fix the RRH on the pole, do the following:
Prerequisites
Before proceeding with fixing the RRH on the pole, make sure that you have the
items mentioned in the table below.
Table 8. Parts and Tools for Fixing RRH on the Pole
Category
Description
Fasteners
M8 × L30 hexagonal bolt (Washer assembly)
1 EA
Recommended Torque Value
M8 hexagonal. bolt
110 lbfin
Working Tools
 Torque Wrench (100 to 400 lbfin)
 Torque Wrench Spanner Head (apply hexagon head: 13 mm)
 RF Alignment Tool
1 Place the unit bracket on the fixing groove of the mounting bracket.
RRH
Mounting Bracket
Cherry Picker
Operator