RT4401-48A Installation Manual v3.0 12
Copyright © 2019, All Rights Reserved.
Chapter 2 Installing System
This chapter describes the installation procedures of the RRH.
Installation Procedure
The figure below depicts the overall procedures for installing the RRH:
Figure 5. Procedure to Install the RRH
Ensure that the power switch of the power supply is OFF when installing the
system. Installing the system with the power switch ON may cause system damage
or fatal human injury when connecting or disconnecting the cables.
To prevent the risk of electrical shock, do not wear accessories such as watches
and rings.
Unpacking and Transporting
To Next Page
Loading...
