Samsung RT4401-48A - Page 27

Chapter 1 Before Installation
RT4401-48A Installation Manual v3.0 11
Copyright © 2019, All Rights Reserved.
No.
Name
Specification
Purpose of use
25
Knife
Basic Tool
Cutting
26
Heating Gun
50°C to 300°C
Shrinking the feeder cable tube
27
Multi tester
Digital Pocket Tester
Checking voltage and current to
detect cable disconnection
28
Angle Meter
Normal
Checking RRH tilting
29
Fiber Optical Test Set
Wave length:
1270 nm, 1310 nm, 1550 nm
(single-mode)
850 nm, 1310 nm (multi-mode)
Checking optical level
30
RF Alignment Tool
-
Checking azimuth and tilting
The required installation tools may vary depending on the site conditions.
In addition to the basic tools, protractor, ladder, safety equipment, and cleaning
tools must also be arranged, considering the site conditions.