104 Cubis MSA User Manual
Weighing in Percent
Execute Task: Weighing in Percent
D t If you haven’t already done so, go to Application Management.
y The task selection is displayed.
t Touch the desired task.
or
t If the desired task is already selected, touch 5VCTV.
t If required, enter the reference percentage (e. g. 100%) or the reference weight.
t Place the sample on the weighing pan.
In the example it is the reference sample.
y The weight value of the reference is displayed.
t To begin the Weighing in percent, touch 5VCTV.
y The values for the reference percentage and the reference weight are
displayed.
t Place the next sample on the weighing pan and touch 9GKIJ.
y The weight value is displayed.
t To toggle between the display of weight and percent, touch 2GTEGPV
or 9GKIJ.
To Next Page
Loading...