150 Cubis MSA User Manual
Interfaces
Special Outputs
Position 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
* * * * * * – – * * * * * * CR LF
or* * * * * * A * * * * * * * CR LF
or* * * * * * A B * * * * * * CR LF
and only upon request with ESC w0 (no print command):
* * * * * W * X X X Y Y Y CR LF
or* * * * * * I * X X X * * * CR LF
*: Spaces A = C: Adjustment
AB = – –: Final readout W: Draft shield status (optional):
A = H: Overload I: Ionizer (optional)
AB = H H: Overload in checkweighing Y,Y,Y = Draft shield doors
A = L: Underweight XXX = Decimal value calculated from
AB = L L: Underweight in checkweighing binary data
Decimal value Binary value Control information
1
Bit0 = 0: No error/ionizer off
Bit0 = 1: Draft shield error/ionizer on
2
Bit1 = 0: Draft shield motors off
Bit1 = 1: Draft shield in motion
8
Bit3 = 0: Learning function off
Bit3 = 1: Learning function on
16
Bit4 = 0: At least one draft shield door open
Bit4 = 1: All draft shield doors closed
32
Bit6 = 0: Motorized draft shield operation
Bit6 = 1: Manual draft shield operation
R,M,L = COO: Right door closed(Closed), Middle and Left doors open (Open)
R,M,L = OCC: Right door open (Open), Mmiddle and Left doors closed (Closed)
Error Message
Position 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
* * * E r r * */# # # * * * * CR LF
*: Spaces # # #: Error code number
Example: Output of the weight value + 111.255 g
Position 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
* * * 1 1 1 . 2 5 5 * g * * CR LF
Position 1: Plus +, or minus – or space
Position 2: Space or weight value
Position 3 – 10: Weight value with decimal point, leading zeros are output as
spaces.
Position 11: Spaces
Position 12 – 14: Characters for unit of measure or space
Position 15: Carriage return
Position 16: Line feed
To Next Page
Loading...