Cubis MSA User Manual 45
System Settings (Menu)
Setting up Q-Level Leveling Function
You can configure the leveling function here.
Leveling notice
1HHPQPQVKEG: The prompt to perform leveling is omitted.
5VCVWUFKURNC[: As soon as leveling is required, the tag Level me appears and
flashes.
#NCTOOGUUCIGNGXGNKPIOCPFCVQT[: As soon as leveling is required, the
tag Level me appears and flashes. If this notice is ignored, an alarm message
appears after 5 minutes. In that case, you can only continue working after you have
performed leveling.
Automatic leveling (only on balances with motorized leveling feet.)
1HHUVCTVD[VQWEJKPI: To activate automatic leveling, touch 5VCTV.
#EVKXCVGVJGHWNN[CWVQOCVKEHWPEVKQP: Before every calibration/adjustment
routing, the balance will be leveled automatically.
t To save settings, touch 5CXG.
Defining the Startup Mode of the Balance
t You can select the mode that is used when the balance is turned on and when
you touch the A operating key repeatedly.
Options: 1PUVCPFD[or #NYC[UQP
t To save settings, touch 5CXG.
Defining the Power saving Mode of the Balance
t
Switch the power saving mode of the balance on or off. 1HHPQHWPEVKQP:
The power saving mode is not in use.
#WVQUJWVQHHCHVGTOKPWVGU: The backlighting of the display and control
unit switches off if the device is not operated for 2 minutes.
t To save settings, touch
5CXG.
Resetting General Weighing Settings to Default
You can reset all balance settings back to the default delivery status (after a security
prompt).
To Next Page
Loading...
Need help?
General