Sartorius MSA3.6P - Configuring “Print to file”

50 Cubis MSA User Manual
System Settings (Menu)
Configuring “Print to file”
Purpose:
– Transferring a print file in TXT or CSV format to a SD card or FTP server.
– Viewing a print file directly in an Internet Browser.
t Select 1HHPQHWPEVKQP.
t Specify the file format.
Print to CSV file:
In addition to the SBI output (like in the TXT file), three additional columns are
also written to the file: ID, Value and Unit. The 4 columns are separated by
the “;” character. The “+” sign has also been removed in the third column and
the decimal point has been replaced by a decimal comma (because of Excel).
t Touch 1HHPQHWPEVKQP to specify the settings for automatic or manual data
transfer.
y The data are deleted from the balance after the automatic or manual transfer
so that only the new data are transmitted the next time there is an automatic
transfer.
y Manual transfer:
Touch 6TCPU5& or 6TCPU(62 during operation to transfer data to the
SD card in the balance or to the FTP server.
y The transfer takes place in the data/print directory.
t Select the output medium for the file.
y This file can be transferred manually or automatically to the SD card of
the FTP server. Combinations are also possible, e.g. manual transfer to the
SD card and automatic transfer to the FTP server.
“To SD card:”
y When exporting, print files can also be exported to the SD card independent
of the transfer. This will create a copy (backup) of the file to the SD card.
This does not delete the file from the balance. After the export, the files are
located in the directory data/all/EXPORTxxxx/print.
“To FTP server:”
y If you use the FTP server option for the transfer, the parameters for the
FTP server must be entered in the menu (see next section). The user must have
the rights to create subdirectories on the FTP server.
t Select the desired interval, the date and the time of the first transfer.
t To save settings, touch 5CXG.