Sartorius MSA3.6P - Configuring data transfer settings for a FTP server; Configuring the Alibi Memory

Cubis MSA User Manual 51
System Settings (Menu)
Configuring data transfer settings for a FTP server
t Specify the data transfer settings to a FTP server.
t Enter the following parameters for the FTP server:
IP address, port, FTP user name, FTP password, subdirectory also optional.
The user must have the rights to create directories on the FTP server
t For more information about displaying a print record via an
Internet browser, go to Interfaces, “Remote Control of the Balance from
a PC via Ethernet” section.
Configuring the Alibi Memory
Here you can switch on the alibi memory, delete the recorded data and set the
interval for automatic deleting.
t Slide the right scroll bar in the submenu &GXKEGRCTCOGVGTU downward to
the menu item #NKDKEQPHKI.
6WTPKPIVJG#NKDK/GOQT[1P1HH
t Select whether you want to have the alibi memory switched on or off.
#WVQOCVKE&GNGVKPI
t Define whether the data stored in the alibi memory should be deleted
automatically at regular intervals after a pre-specified time.
t As appropriate, enter the desired interval (in days).
+PKVKCNK\KPICPF5YKVEJKPIQPVJG#NKDK/GOQT[
You can delete the Alibi memory immediately. The settings for the alibi memory
(On/Off, automatic deletion) will remain stored.
t To delete data in the alibi memory, confirm the security prompt.
Loading a Software Update
Cubis software is updated at regular intervals. A detailed description of how to
perform a software update on your balance can be found in chapter Updating the
Software.