EasyManua.ls Logo

Sartorius MSA3.6P - Assigning Opening Functions to Keys (Learning Function)

Sartorius MSA3.6P
201 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
54 Cubis MSA User Manual
System Settings (Menu)
t Configure the automatic mode for the draft shield.
*1HHPQHWPEVKQP: Automatic mode is off.
5%NQUG HWPEVKQP QRGP: The draft shield doors are closed in automatic mode
while the function is executed, and then the doors re-open.
%NQUG HWPEVKQP: The draft shield doors are closed in automatic mode while
the function is executed.
Automatic mode can be executed using the following keys:
6#4'key
24+06key
%CN#FLkey
or can be executed YJGPCEQORQPGPVKUUCXGF for logging applications
(statistics, formulation, totalization)
h
If automatic mode is on, the draft shield doors automatically close when
the balance is switched to standby.
Assigning Opening Functions to Keys (Learning Function)
Example: The keys should be cross-configured (left key opens/closes right door and
vice versa).
The balance must be turned on.
t Close all draft shield doors.
t Manually operate the door you want to assign to the left key: Push the right
door open to the extent you want it to be opened (entirely or partially).
t Press the left key O.
y The door will close again. Now you have configured the left key so that, when
pressed, it opens or closes the right door.
t Proceed accordingly to configure the left door/right key.
h
According to the same pattern, you can assign operation of the upper door to one
of the keys. You can also configure one key to move both doors by manually open-
ing both doors during set up before you press the desired key.
Installing the Ionizer (Optional)
If your balance is equipped with an ionizer module, you can configure the basic
settings for the ionizer module here. During any Electrostatic Charge Eliminator
task, you can change these settings as needed.
t Define ionizer function.
5YKVEJQHHKQPK\GT: The ionizer is switched off.
/CPWCNCEVKXCVKQP: Ionization can be turned on at any time by pressing the
+QP key.
*#WVQOCVKEGZGEWVKQPCHVGTENQUKPIFTCHVUJKGNF: Ionization is exe-
cuted automatically, as soon as the draft shield is closed.

Table of Contents

Related product manuals