Sartorius MSA3.6P - System Settings (Menu); Installing the Ionizer (Optional)

Cubis MSA User Manual 55
System Settings (Menu)
Installing the Ionizer (Optional)
If your balance is equipped with an ionizer module, you can configure the basic
settings for the ionizer module here. During any Electrostatic Charge Eliminator
task, you can change these settings as needed.
t Define ionizer function.
5YKVEJQHHKQPK\GT: The ionizer is switched off.
/CPWCNCEVKXCVKQP: Ionization can be turned on at any time by pressing the
+QP key.
*#WVQOCVKEGZGEWVKQPCHVGTENQUKPIFTCHVUJKGNF: Ionization is exe-
cuted automatically, as soon as the draft shield is closed.
t Define how long an ionization routine should take.
1RGTCVKPIVKOG in seconds: 3 to 15 sec, *8 sec.
t Define the intensity level at which the ionizer operates.
.QY, */GFKWO, *KIJ
t Check and correct all settings as required.
t To save settings, touch 5CXG.