Cubis MSA User Manual 61
Task Management
Configuring Printouts in the System Settings (Menu).
h
The settings can only be modified as long as no task has been activated (ready
to start) in the operating mode. Make sure that basic weighing is active in the
operating mode.
t Toggle to the System Settings menu.
t Open the %QPHKIWTGFCVCQWVRWVsubmenu.
If the submenu is not selectable, check the operating mode and select basic
weighing.
y The setting menu will open. Several options are not modifiable because they
are pre-set by the interface configuration.
The initial default setting and several exemplary settings are described in the
following.
To Next Page
Loading...