Sartorius MSA3.6P - Print events; Print Elements

64 Cubis MSA User Manual
Task Management
Print events
You can define one or several events that trigger a printout. The number
of selectable print events depends on the selected application.
Basic Weighing:
2TGUUVJG24+06MG[
5VCTVKPICVCUM
'PFQHVCUM
%CNKDTCVKQPCFLWUVOGPVTGUWNV
, after calibration/adjustment
For Calculating applications the following is additionally possible:
+PKVKCNK\CVKQP
4GUWNV
For logging applications the following is additionally:
%QORQPGPV
'XCNWCVKQP
The application-specific print events cannot be configured in the Basic menu
but only when you create a new task.
Print Elements
Which information should be printed?
/GCUWTGFXCNWG
).2JGCFGT
).2HQQVGT
'ORV[NKPG
&QVVGFNKPG
(QTOHGGF
&CVGCPFVKOG
etc.
t To scroll through the extensive list, slide the right scroll bar downwards.
t To view the complete list, touch ':6'0&.
t To minimize the list, touch4GFWEG
t To reset to default, touch
5VCPFCTF.
Sequence of Print Elements
In which order should the print elements be printed?
y The list of selected print elements is displayed.
You can change the order and can duplicate individual elements, for multiple
printouts (e. g. at the beginning and end of the list).
t Mark the element that you wish to move or duplicate.
t To duplicate the element, touch &WRNKE.
t To move the element downwards in the list, touch &QYP.
t To move the element upwards in the list, touch 7R.