Sartorius MSA3.6P - Select the identifiers that can be entered for executing the task.; Select whether or not the variable identifiers should be counted up automatically.

76 Cubis MSA User Manual
Individual Identifiers
y In the example, a unique title has been defined for each identifier.
y Enter the desired value (text) for each Identifier .
.
t Select the identifiers that can be entered for executing the task.
t Select whether or not the variable identifiers should be counted up
automatically.
y In the example, the identifier for printout ID1 should be enterable and be counted
up automatically.
y An overview of all settings is displayed.
t Check all settings and change as required.
y Now you will be prompted to configure the weighing and printing functions.
t Check all settings and change as required.
t Enter a short name and a description for the new task.
t To save the new task, touch 5CXG.