Cubis MSA User Manual 9
Getting Started
Balance with Draft Shield
t Remove the packages (containing draft shield panels, weighing pan,
pan support, AC adapter, etc.) from the lower packaging and place them
to one side.
t Use both hands to lift the balance out of the packaging.
3
Exercise caution to avoid glass breakage.
Never lift the equipment by the draft shield panels to remove it from
the packaging.
t Place the balance on an even surface.
Balance with No Draft Shield
t Use both hands to remove the model without a draft shield from the
packaging.
t Remove the AC adapter and the balance parts from the packaging.
To Next Page
Loading...