Sartorius MSA3.6P - Define whether or not the weighing results should be calculated with an additional factor and how this factor should be applied.

Cubis MSA User Manual 95
Averaging
t Define whether or not the weighing results should be calculated with
an additional factor and how this factor should be applied.
0QECNEWNCVKQPHCEVQT
(KZGFHCEVQTYou must now enter this factor.
8CTKCDNGHCEVQT. You must enter this factor when you execute the task.
Example: Each animal should receive a food supplement of 50 mg per kg of body
weight. For this, the factor 0.05 can be entered (weight value
in g/1000 g  0.05 g). During the measurement, both the weight value (animal
weight, e.g. 285 g) as well as the calculated value (amount of supplement, e.g.
can be displayed.
If you selected the calculation:
t Define the number of decimal places to be used for the calculation.
 PQPGFKIKVU
t Define whether or not the end of the measurement (and if necessary the
calculation) should have an acoustical signal.
  #EQWUVKEUKIPCNQHHor#EQWUVKEUKIPCNQP
y An overview of all settings is displayed.
t Check all settings and change as required.
y A message asks whether you would like to add another application.
t If required, select additional applications to be combined.
y Prompts for configuring weighing and printing appear.
t Check all settings and change as required.
t Enter a short name and a description for the new task.
t To save the new task, touch 5CXG.