Kingfisher Plus+ Hardware Manual
CAUTION! Contacts should be protected with appropriate suppression devices when wired
with inductive loads to increase the service life of relays (please see the
"Switching Inductive
Loads" section for more details). Contacts should also be protected with external fusing.
#)
CAUTION! If input voltage is expected to exceed Safety Extra Low Voltage (SELV) levels
(DC 60 V or AC 42 V
PEAK
relative to system earth and/or ground) then all used commons
must be connected to a single power source and no other power sources are allowed to be
connected to this module.
Hardware Manual Version 7.16
http://www.servelec-semaphore.com/
Page 194
To Next Page
Loading...