Page 6 - Bank functions
This page provides bank specific options:
Key Label Function
F1 Bank Init Wipe all data in this bank
F2 BPgm Configure a bank program change number
F3 BTempo Configure a bank initial tempo
F1 - Bank Initialise
The “Bank Init” function is used to completely wipe all the patterns and parts in the currently selected
bank. To ensure it is not used by accident, after pressing the soft-key, the following display will be
shown:
IMPORTANT: In order to confirm that the bank should be initialised, you need to press both keys F1
and F2 together at the same time.
There is no way to get your bank data back unless you made a sysex backup, so USE WITH
CAUTION.
Partial Bank Init
There is also a partial bank init function which will only erase patterns and playlists for active tracks.
To Next Page
Loading...
