Other Pattern Edit Functions
Quick Config
The Quick Config page has a preset list of combined operations that can be applied to a pattern.
At present, these include options for setting up 1, 2, 3 or 4 of the pattern auxes with the “aux note”
events.
This makes it easy to set up a pattern for polyphonic recording.
Refer to the Using Auxiliary Events chapter for an explanation of aux notes.
To access Quick Config:
• hold the FUNC key
• press the UPPER MODE button
From the Quick Config page:
• use the DATA knob to select the required operation
THEN
• press the “apply ” soft-key, F1, to perform the selected operation
OR
• press the “cancel” soft-key, F3, to return to pattern edit
Quick Mute Access
While using pattern edit, if you want to mute or un-mute any of the tracks, you can quickly access the
track mutes by holding the FUNC key, and pressing PLAY/EDIT.
While the FUNC key remains held, the step keys 1 to 8 will show the current track mute status, and
allow you to toggle them as in play mode.
To remind you which track you are currently editing, that track LED will flash green.
Release the FUNC key to return to the normal step key edit function.
Note that this key combination is not the same as for mute access in playlist edit. Other functions of
the keys used in each mode preclude this.
To Next Page
Loading...