F3 – Range
The “range” option lets you set the range of notes above the lowest note that can appear randomly in
your pattern, as follows:
• press the “range” soft-key, F3. The display will show:
• use the DATA knob to select a new value from 0 to 127
THEN
• press the “save” soft-key, F1, to store the new selection
OR
• press “lose”, F3, to restore the previous value.
A range of 0 does not impose any limit - the random notes may be anything from the configured
lowest note, to the highest possible MIDI note.
Any other value will give that number of possible different random notes, from the lowest note
upward.
Note that a range of 1 means only the lowest note will be used.
If the range is set to be larger than the total number of MIDI notes above the configured lowest note,
the effective range will be restricted.
To Next Page
Loading...
