GB SGM Technology for lighting
User’s Manual 1.00 Pi
lot 3000
- 24 -
Manual Cue
As well as the Register Master, the Manual Cue feature can be applied to any Controller into the
current show by entering the dedicated configuration into the “Setup” menu.
The Controllers configured as Manual Cue can handle “additional” Cues within each Cue-List.
The maximum set of different Manual Cue which can be assigned to each Register is 6.
To each Register can be assigned a set of Manual Cue which could be completely different from other
Registers.
A Register can be selected on Pilot 3000 simply by pushing the desired Register key, this will allow
the playback of the Cues related and, at the same time, will automatically give the access the
Manual Cue assigned to the Register.
In addition, it is also possible to select a Register with the intention to access the Manual C e
without starting the playback of the related Cues, by using the SELECT key.
The action of pushing the SELECT key together with the Playback key of the desired Reg st r, will
active the Manual Cue into the Controllers of the selected Register.
ATTENTION!!
On Version 1.0 of Pilot 3000 it will be possible to assign the Manual Cue onl on the first 20
Registers on page 1 and not on the whole 400 Registers available.
Future software upgrade will extend the configuration capabilitie of the Controllers to the
single Cue and to each Register.
To Next Page
Loading...