SGM Technology for lighting GB
Pilot 3000 Us
er’s Manual 1.00
- 85 -
Push the Cue Touch key to end the timings editing.
For the selected Cue-List, is also possible to group all the Cues or part of them and perform the timings
modification at the same time.
Should be necessary to set the default state for the Wait nd the F de-OUT timings, simply spin their
encoder wheels back to 0.00 seconds.
TIMING OF A CHASE
The timing of a Chase differs from the timing Norm l Live!.
In fact, while for the Normal – Live! mode, each C e can have a unique timing set totally different from
other Cues, the Chase mode has the same tim ng set for all the Cues. The timing of a Chase can therefore
be modified while the Chase runs, but these ch nges will affect all the Chase’ steps at the same time.
Pilot 3000 handles the timing of a Cha e by means of the following two parameters:
“Speed (Bpm)” Tr gger ng frequency of the steps of a Chase
“Fade(%)” F de percentage with respect to the Speed time
To Next Page
Loading...