GB SGM Technology for lighting
User’s Manual 1.00 Pi
lot 3000
- 50 -
Erase Show
The Erase command allows to cancel the Shows previously saved into the Compact flash.
ATTENTION!!
The erase operations are irreversible.
This means that once cancelled a Show from the Compact Flash, it will be permanently lost and
it won’t be possible to restore it through the Restore command.
Therefore pay attention before proceeding with the Erase operation
and be sure that you don’t want to use again the show you are erasing.
To permanently erase a show from the Compact Flash:
select the show to be erased with the related key.
Press the Erase k
ey
press Yes on the warning window appearing, if you want to go on with the show eras procedure
wait that the white progress-bar is completed
CLEAR SHOW
Clear Show is a function lowing to cancel the current show from the temporary memory in order to start a
completely new o e and different in the main features.
ATTENTION!!
The Cl ar Show operations are irreversible. This means that once the show is cancelled the
current show cannot be loaded back unless it was previously saved into the Compact-Flash.
Therefore it is always necessary to perform a Backup Show before starting any Clear actions.
o Clear the Show:
press the Clear Show key in the Tools menu
press Y
es on the warning window appearing, if you want to go on with the Clear operation
wait the confirmation window.
To Next Page
Loading...