GB SGM Technology for lighting
User’s Manual 1.00 Pi
lot 3000
- 84 -
MODIFICATION OF THE TIMING NORMAL – LIVE!
To modify the Cue timing, follow the simple procedure here below:
By means of the SELECT key, select the Playback register which co tains the Cue that needs a timing
modification
Push the Touch key of the relevant Cue to be modified (i.e : Cue 3).
The left hand red LED lit ON the touch key will show he election of the Cue.
The four Encoder wheels will be automatically assigne and enabled to any modification of each of the
Cue timings available and the fields on top of the en oders will show the changes.
Modify now the Cue timings according to the needs.
The above example shows Cue timing changes for the Fade IN, Wait and Fade OUT.
To Next Page
Loading...