GB SGM Technology for lighting
User’s Manual 1.00 Pi
lot 3000
- 86 -
Speed (Bpm)
The Speed time is the triggering frequency at which, each step of a Chase is enabled and is expressed into
BPM (Beat per Minute).
A Speed value of 60 Bpm, means a frequency of a Cue triggered every econd.
A Speed value of 120 Bpm, means a frequency of a Cue trigger d ev y 0.5 seconds.
The speed value for a Chase can be thought as the “Tic” of a metr nome.
Fade (%)
The Fade timing for each step of the Chase, can be def ned as a percentage of the Speed time.
A Fade value of 50% applied to a Speed time of 60 Bpm, allows an overall step’s time of 1 second in which
0.5 seconds will be a fading transition and for the remaining time the step will stand still.
A Fade value of 0%, will not cause any fading transition so the Chase steps will enabled the Cues instantly
at each trigger.
A Fade value of 100%, will not cause the step to stand still as the Fade time will use the whole Speed time
to complete its transition. As a result f this setting, the Chase steps will continuously flow with a fade
transition without any pause.
To Next Page
Loading...