Sharp AQUOS LX959H - Wallpaper Setting; Boot Picture

45
Watching TV
Wallpaper setting
w Timer setting
w Data source
Forthewallpaper,youcanselecteitherthestillimages
pre-installedintheTVoryourfavouritestillimages
storedintheSD/USBdevice.
Thisfunctionisavailableonlywhen“Quickstart”isset
to “On (Wallpaper)”.
Press“POWER”oftheR/Ctostartorendthe
wallpaper, if you want to quit the wallpaper, please set
the “Quict start” to “Off” or “On”.
Activatingthefunctionwilldisplaystillimageswhenthe
TVisinstandbymode.
NOTE
• Imagesaredisplayedasaslideshowin3-minuteintervals.
• AsaUSBdevicecannotbedetectedimmediatelyafter
theTVisturnedonfromstandbymode,thewallpaper
pre-installedintheTVmaybedisplayedevenwhen“Data
source”issetto“SD/USB”.
When you display images by using the USB device:
• Createafoldernamed“WP”intherootdirectoryofthe
SD/USBdevice(therstdirectorywhentheSD/USBdevice
is opened), and store into the folder the still images you
want to display for the wallpaper.
• YoumustinserttheSD/USBdeviceintotheSD/SDHC
cardslot/USBterminalbeforeturningofftheTV.
YoucansetthelengthoftimetheTVwillremaininthe
Wallpapermode(3hours/6hours/12hours/24hours).
NOTE
• Setting“Quickstart”to“On”consumesmorepower.
• Nobuttonsexceptfor“POWER” workevenwhilethestill
images are being displayed.
• Iftheready-for-useSD/USBdeviceisnotinserted,the
stillimagespre-installedintheTVwillbedisplayedina
slideshowevenwhen“Datasource”issetto“SD/USB”.
• Thestillimageswillbedisplayeduntilthesettimehas
elapsed.
• Ifyoudonotwanttousethewallpaperasdescribed
above,set“Quickstart”to“On”or“Off”.
Boot picture
Withthisfunctionactivated,theSHARPlogowillbe
displayedwhenyouturnontheTV.
Selected item Selected item
Pre-installed
Theimagespre-installedintheTVwill
be displayed in a slideshow.
SD/USB
Imagesstoredforthewallpaperwill
appear.
Ifonlyasinglestillimageisstoredin
theSD/USBdevice,thatimagewillbe
displayed as the wallpaper. When there
are multiple still images in the memory,
all the images will be displayed in a
slideshow.
Press
MENU
andtheMENUscreendisplays.
1
Press
a
/
b
to select desired items, and then
press
?
.
4
Press
b
/
c
/
d
to select “Option”.
2
Press
a
/
b
to select “Wallpaper setting” , and
then press
?
.
3
Press
MENU
andtheMENUscreendisplays.
1
Press
a
/
b
to select desired items, and then
press
?
.
4
Press
b
/
c
/
d
to select “Option”.
2
Press
a
/
b
toselect“Bootpicture”,andthen
press
?
.
3
NOTE
• Thisfunctionisnotavailablewhenthe"QuickStart"isset
to"On"or"On(wallpaper)".