Sharp AQUOS LX959H User Manual

66
AQUOS LINK
PowerontheAQUOSBDplayerandselect
the appropriate external input.
1
Press
MENU
andtheMENUscreendisplays.
2
Press
a
/
b
toselect“Topmenu/titlelist”,and
then press
?
.
4
Playback of titles using AQUOS LINK
This section explains how to play back a title in the
AQUOSBDplayer.
Selectthetitlewith
a
/
b
/
c
/
d
, and then
press
I
to start playback.
5
• ThelinkedrecordernowpowersonandtheTV
automatically selects the appropriate external
input source.
• ThetitlelistdatafromtheconnectedAQUOSBD
player displays.
Press
MENU
andtheMENUscreendisplays.
1
Setup menu
You can call up the menu of an HDMI CEC-compatible
externaldevice(player,recorder,decoder,etc.)usingthe
“Setupmenu”function.
Press
a
/
b
toselect“Setupmenu”,andthen
press
?
.
3
NOTE
• Ifaconnecteddevicedoesnothavethisfunctionorthedeviceisin
a status where the menu cannot be displayed (recording, entering
standby,etc.),thisfunctionmaynotbeavailable.
Press
a
/
b
toselect“Recorderpoweron/off”,
and then press
?
.
3
Everytimeyoupress
?
in“Recorderpower
on/off”,theCEC-compatiblerecorderwillbe
turnedon/off.
4
Recorder power on/off
ThisfunctionisforturningoftheCEC-compatible
recorderon/off.
PressMENUandtheMENUscreendisplays.
1
Operating an AQUOS LINK device
AQUOSLINKallowsyoutooperatetheHDMI-
connecteddevicewithoneremotecontrol.
Use the following procedures to start playback.
Press
I
to start playback of a title.
• Seethispage,section“Playback of titles using
AQUOS LINK” if you want to start playback using
thelistofthetitlesoftheAQUOSBDplayer.
1
Press
J
to fast forward.
Press
G
toreverse.
PressREC STOP
H
to stop.
Press
F
to pause.
Press
SOURCE
a
toturntheHDMI-
connecteddeviceon/off.
2
Afteryouselectedrecordingmedia(HDD,
DVD,etc.)inthemenu,pleasemakesurethe
recording menu in the ready condition.
1
PressREC
E
to record a programme.
2
Use the following procedures to start recording.
Checkthefollowingitemsbeforerecording.
• Makesuretheantennacableisconnectedproperly.
• Checkiftherecordingmedia(HDD,DVD,etc.)hasenough
capacity for recording a programme.
• SelecttheequipmentforrecordinginSelectingRecorder.
PressREC STOP
H
to stop recording.
3
Press
c
/
d
toselect“Linkoperation”.
2
Press
c
/
d
toselect“Linkoperation”.
3
Press
c
/
d
toselect“Linkoperation”.
2
Link
Operation
Top menu/title list
Menu
Recorder power on/off
Setup menu
Media change
Recorder EPG
Chang audio output device
【By AQUOS SP】
Sound mode change
Model select
AQUOS LINK setup

Sharp AQUOS LX959H Specifications

General

Brand	Sharp
Model	AQUOS LX959H
Category	TV
Language	English