Sharp AQUOS LX959H

61
Settings when using external devices
Press
b
(INPUT SOURCE) on the remote
control unit or INPUT ontheTVtoselectthe
input source.
• Theimageandsoundfromtheselectedsource
areoutputontheTV.
• Youcanalsoselecttheinputsourcebypressing
a
/
b
.
2
Press
b
(INPUT SOURCE) on the remote
control unit or INPUT ontheTV.
1
EXT MEDIA
TV INFO
MENU
GUIDE
SLEEP
EXT
MEDIA
TV
INF
O
MENU
G
UIDE
S
LEE
P
Canuseforselectingtheinputsource.
Using
b
(INPUT SOURCE) on the remote control
unit or INPUT on the TV.
INPUT
allowsyoutochoosefromtheavailableinput
sources.
Selecting the input source
ThissystemisusingtheHDMICEC(Consumer
ElectronicsControl)technology.
What you can do with CEC capable
using HDMI devices
4 Single remote control operation
TheTVautomaticallyrecognisestheconnectedHDMI
devicesandyoucanusetheremotecontrolprovided
withthisTVtocontroltheTVandtherelativedevices
atthesametime.(Seepage63to67)
NOTE
• PointtheremotecontroltowardtheTV,nottothe
connectedHDMIdevice.
• VideonoisemayoccurdependingonthetypeofHDMI
cableused.MakesuretouseacertiedHDMIcable.
• TheseoperationsaffecttheHDMIdeviceselectedasthe
currentinputsource.Ifthedevicedoesnotoperate,turn
onthedeviceandselecttheappropriateinputsource
using
b
(INPUT SOURCE) on the remote control unit or
INPUTontheTV.
• Whenyouinsert/removeHDMIcablesorchange
connections,turnonallconnectedHDMIdevicesbefore
turningontheTV.Conrmthatpictureandaudioare
correctlyoutputbyselecting“HDMI1”,“HDMI2”,“HDMI
3(ARC)”or“HDMI4”fromthe“INPUTSOURCE”menu.
Controlling HDMI devices
Audio select for connecting HDMI
WhenconnectingHDMItotheHDMI2terminal,and
inputtinganalogueaudiosignalsfromtheAUDIOIN
terminal.
Goto“MENU”
s
“Setup”
s
“Option”
s
“Terminal
setting”
s
“Audio select”.
Selected item
Description
HDMI (Digital)
WhenconnectingdeviceswithHDMI
cabletotheHDMI2terminal.
HDMI +
Analogue
WhenconnectingdeviceswithHDMI
cabletotheHDMI2terminaland
inputting analogue audio signals from
theAUDIOINterminal.
NOTE
• WhenconnectinganDVI-HDMIconversionadaptor/cable
toHDMI2terminal,youmustsetto“HDMI+Analogue”.If
“HDMI(Digital)”isset,therewillbenosoundoutput.