To Next PageTo Next PageWhat to do if my Sharp TV has no power?
If your Sharp TV isn't turning on, check the following: ensure the AC cord is properly connected. If it is, verify that the power has been turned on. If the power switch isn't working, remove the power plug, wait at least five seconds, re-insert it, and then press the power button on the TV.
Why does my Sharp TV power suddenly turn off?
Your Sharp TV might be turning off due to a few reasons. The unit's internal temperature may have increased, so remove any obstructions from the vent or clean it. Alternatively, check the ECO setting. Also, verify the settings for the sleep timer, no signal off, or no operation off.
What to do if my Sharp AQUOS LX959H remote control does not operate?
If your Sharp TV remote isn't working, make sure the batteries are correctly inserted with the proper polarity. If they are, try replacing them with new ones. Also, avoid using the remote under strong or fluorescent lighting, and ensure that a fluorescent light isn't shining directly on the remote control sensor.
Why is there no picture on my Sharp AQUOS LX959H TV?
If your Sharp TV screen is blank, check if the connection to external equipment is correct. Then, ensure the correct input is selected and the picture adjustment is correct. Also, verify that the antenna is connected properly and that "On" is not selected in "Audio only".
What to do if my Sharp AQUOS LX959H has no sound?
If there is no sound coming from your Sharp TV, first ensure that the volume isn't too low. Also, check that headphones are not connected.
What to do if my Sharp AQUOS LX959H TV unit cannot be operated?
If your Sharp TV isn't responding, it might be due to external factors like lightning or static electricity. Turn the power off or unplug the AC cord, wait 1 to 2 minutes, and then plug it back in to operate the unit.
Why do I see block noise appears on the screen of my Sharp AQUOS LX959H TV?
If you're seeing block noise on your Sharp TV screen, check if the antenna is pointing in the correct direction. Also, check the “Signal strength” and “Quality”. Ensure there aren't any physical objects blocking the antenna, and verify if the antenna or antenna cable is compatible with DTV broadcast.
What to do if the picture is cut off on my Sharp AQUOS LX959H?
If the picture on your Sharp TV is cut off, check if the image position is correct. Also, make sure the screen mode adjustments, like picture size, are set correctly.
Why is the colour strange on my Sharp TV?
If the colour on your Sharp TV appears strange, light, dark, or misaligned, try adjusting the picture tone. Also, consider whether the room is too bright, as this can make the picture look dark. Check the colour system setting and the HDMI auto view setting.
Crucial safety instructions to prevent hazards.
Guidelines for safely moving the television set.
Safety warnings and guidelines for using 3D glasses.
Instructions for physically mounting the TV stand.
Steps for connecting the TV to a network.
Steps to secure the TV to a wall for stability.
Guide for the initial setup wizard upon first use.
Configuring DTV service settings automatically or manually.
Blocking specific channels to prevent unauthorized viewing.
Registering a 4-digit password for child lock functionality.
Instructions for connecting and using Miracast-compatible devices.
Manually choosing various picture size aspect ratios.
Selecting preset AV modes via the menu.
Selecting preset AV modes using the remote control.
Adjusting picture settings like contrast, brightness, and sharpness.
Adjusting the picture's horizontal and vertical position.
Setting up EPG for receiving broadcast data.
Choosing and tuning into a selected programme from the EPG.
How 3D and 2D images are displayed based on input signals.
Instructions for powering the 3D glasses on and off.
Switching between 2D and 3D viewing modes.
How the TV automatically detects and displays 3D image types.
Selecting 3D/2D viewing when automatic detection fails.
Changing from 3D viewing mode to 2D mode.
Making detailed adjustments to enhance 3D image viewing.
Enabling automatic switching between 3D modes.
Overview of CEC capabilities for HDMI device control.
Explanation of AQUOS LINK technology.
Features and capabilities of AQUOS LINK.
Enabling and controlling AQUOS LINK features.
Playing back titles from an AQUOS BD player via AQUOS LINK.
Adjusting the picture size for PC display.
Controlling the TV via IP network.
Steps for connecting the TV to the internet or home network.
Detailed steps for wired network setup.
Detailed steps for wireless network setup.
Navigating and selecting items on the HOME screen.
General procedures for using the HOME screen.
How to access and view the TV's HOME screen.
Recording DTV programs to a USB HDD.
Enjoying media via USB or home network.
Steps for connecting a USB HDD for recording.
Connecting USB devices for media playback and recording.
Necessary procedure to register a USB HDD for recording.
Accessing media files from USB devices.
Accessing media files from a home network server.
How to begin recording a program to USB.
How to stop and finish USB recording.
Setting timers for future USB recording.
Viewing and managing photo files.
Displaying photos as an automated slideshow.
Solutions for common TV problems and malfunctions.
Specific troubleshooting for digital broadcast reception issues.
General