Sharp AQUOS LX959H - USB recording; Starting USB recording; Completing USB recording; USB recording timer setting

82
Other useful features
USB recording
Youcanrecordtheprogrammeyouarewatchingto
theregisteredUSBHDD.
w Starting USB recording
PressREC
E
.
•TheTVstartsUSBrecording.
NOTE
• Youcanalsooperatefromthecontrolpanelbypressing
CONTROL.
• Youcannotswitchthechannelortheinputsourceduring
USBrecording.
• DuringUSBrecording,theTVcannotdisplayphotosor
playmusicfromtheinternet,Homenetwork,orSD/USB
storage.
• Youcannotrecordprogrammesthathaveacopycontrol
signal that prohibits recording (They can only be watched
ontheTV).
w
Completing USB recording
NOTE
• Youcanalsooperatefromthecontrolpanelbypressing
CONTROL.
USB recording timer setting
YoucansettheUSBrecordingtimersettingfor
programmes you want to record.
NOTE
• Topreventtherstpartoftheprogrammefrombeingcut,
start recording the programme a few seconds earlier than
time set to start recording.
• Whenrecording/viewingtimersettingsaresetcontinuously
for multiple programmes, schedule the recording of the
previousprogrammetoendearlierthantheendofthe
programmeitself.Recording/viewingtimersettingofthe
next programme will start after that.
• Amessagewillbedisplayedwhenthescheduledtime
overlapswithanexistingschedule.Makechangesin
accordancewiththeon-screeninstructions.
• Itisnotpossibletonewlyschedulearecordingthat
overlapswithatimersettingthatiscurrentlyrunning
(recording). When urgent setting of a schedule is desired,
stop recording before scheduling.
• Acombinedtotalof16timersettings(“Watch”and
“Record”)canbeset.
Timer list
A list of programmes scheduled for recording can be
displayed.
w EPG timer setup
Youcanselecttheprogrammeyouwanttorecordand
setthetimersettingwithEPG(Pages53).
w Manual timer setting
“Manual timer setting” enables you to set date,
recordingstart/stoptimeandchannel.
w Manual clock setting
WhentheTVcannotreceivethetimeviadigital
broadcast, perform “
Manualtimersetting”aftersetting
the clock.
Goto“
TVMenu”>
“
Viewsetting”>
“
Individualsetting”>
“
Clocksetup”>
“
Timeadjustment”.
• YoucannotsetthemanualclocksettingduringUSB
recording.
NOTE
USB recording playback
Toplaybacktherecordedprogrammes,opentheUSB
recording list and select the desired programme.
Press
c
/
d
toselect“Yes”,andthenpress
?
.
•USBrecordinghascompleted.
Press
B
to display the timer list.
Press
?
.
• Press
H
to return the scene that is broadcasting.
Press
B
to display the timer list.
Press
B
againtodisplaythe“Manualtimersetting”
screen.
Set date, recording start/stop time and channel.
Press
c
/
d
toselect“Record”,andthenpress
?
.
•Aconrmationscreenwillbedisplayedforthetimer
setting.
Press
c
/
d
toselect“Yes”,andthenpress
?
.
2
2
2
2
3
4
5
6
1
1
1
1
Press REC STOP
H
.
•Thescreenpromptpopsup.
Press GUIDE.
Go to
“
HOME”>
“
Recordlist”.
Press GUIDE.
NOTE
• Youmaynotplaybackrecordedprogrammeswhenthe
programmeproviderrestrictsorcompletelyprevents
recording or later watching of an encoded programme.