MX-3114N SIMULATION 6 – 97
Input value
56
56-1
Purpose
Backup
Function (Purpose)
Used to transport data between HDD - MFP
PWB SRAM/EEPROM. (Used to repair the
PWB.)
Section
Operation/Procedure
1) Select a target content of data transfer.
2) Press [EXECUTE] key and press [YES] key.
Data transfer of the item selected in procedure 1) is executed.
When the operation is completed normally, "COMPLETE" is
displayed. In case of an abnormal end, "ERROR" is displayed.
56-2
Purpose
Data backup
Function (Purpose)
Used to backup the data in the EEPROM.
SD Card, and HDD (including user authen-
tication data and address data) to the USB
memory. (Corresponding to the device
cloning and the storage backup.)
Section
Operation/Procedure
1) Insert the USB memory into the main unit.
2) Select a target transfer item with the touch panel.
<IMPORT>
From USB MEMORY DEVICE To EEPROM, SD Card HDD
<EXPORT>
From EEPROM, SD Card, HDD To USB MEMORY
3) Press [EXECUTE] key, and press [YES] key.
Data transfer selected in the procedure 2) is performed
When the operation is completed normally, "COMPLETE" is
displayed. In case of an abnormal end, "ERROR" is displayed.
(Machine with the DSK installed)
1) Insert the USB memory into the main unit.
2) Select a target transfer item with the touch panel.
<IMPORT>
From USB MEMORY DEVICE to EEPROM, SD Card HDD
<EXPORT>
From EEPROM, SD Card, HDD to USB MEMORY DEVICE
3) Enter the password with 10-key.
4) Press [SET] key.
5) Press [EXECUTE] key, and press [YES] key.
Data transfer selected in the procedure 2) is performed.
When the operation is completed normally, "COMPLETE" is
displayed. In case of an abnormal end, "ERROR" is displayed.
<Data list outside the backup targets>
(EEPROM/SD Card)
(HDD)
H TYPE PATTERN
1
Print
com-
posing
method
Edging
type
01
PATTERN
2
OR
process
type
1
PATTERN
3
No-
delete-
compo-
sition type
2
Print Blank A B C E F G
Input value32656667697071
Print H I J K L M N
Input value72737475767778
Print O P Q R T U V
Input value79808182848586
Print W X Y Z 0 1 2
Input value87888990484950
Print 356789
Input value515354555657
EEPROM ï‚® HDD Transfer from EEPROM to HDD
HDD ï‚® EEPROM Transfer from HDD to EEPROM
Item/Display Content
Setting
range
Default
value
PWB Type Content NOTE
Controller Machine serial No.
Product key information
Various counter Copy counter/FAX
send counter etc.
Trouble history
PCU Machine serial No.
Various counter Maintenance counter
Machine adjustment execute
history
Trouble history
SCU Various counter Maintenance counter
Trouble history
Classifi-
cation
Content NOTE
Japanese
FEP
User dictionary
Job end list Job end list display data
(The image send series include
the preserved job list.)
Log Job log Read from WEB is
enable.
New N/A • Print history information
• JAM history information
• Trouble history information
• Same position continuous jam
count value
• Charging information
• Life information
Operation
manual
E-manual
To Next Page
Loading...
