Sharp MX-2314N - Page 233

To Next Page

To Previous Page

MX-3114N SIMULATION 6 – 100

61-3

Purpose

Adjustment/Setup

Function (Purpose)

Used to set the laser power

Section

Operation/Procedure

1) Select a target mode for adjustment with [COPY], [PR600/

FAX] on the touch panel.

2) Select an adjustment target item with scroll key on the touch

panel.

3) Enter the adjustment value using the 10-key.

4) Press [OK] key. (The set value is saved.)

When the laser power and the DUTY adjustment value are

increased, the print density is increased and the line width of

line images are increased.

23cpm

Mode Item/Display Content Setting

range

Default

value

Destination

linkage

COPY

A LASER POWER MIDDLE(K1) Laser power setting middle speed/K1 0 - 255 110 x

B LASER POWER MIDDLE(K2) Laser power setting middle speed/K2 0 - 255 110 x

C LASER POWER MIDDLE(C1) Laser power setting middle speed/C1 0 - 255 110 x

D LASER POWER MIDDLE(C2) Laser power setting middle speed/C2 0 - 255 110 x

E LASER POWER MIDDLE(M1) Laser power setting middle speed/M1 0 - 255 110 x

F LASER POWER MIDDLE(M2) Laser power setting middle speed/M2 0 - 255 110 x

G LASER POWER MIDDLE(Y1) Laser power setting middle speed/Y1 0 - 255 110 x

H LASER POWER MIDDLE(Y2) Laser power setting middle speed/Y2 0 - 255 110 x

I LASER POWER LOW(K1) Laser power setting low speed/K1 0 - 255 141 x

J LASER POWER LOW(K2) Laser power setting low speed/K2 0 - 255 141 x

K LASER POWER LOW(C1) Laser power setting low speed/C1 0 - 255 141 x

L LASER POWER LOW(C2) Laser power setting low speed/C2 0 - 255 141 x

M LASER POWER LOW(M1) Laser power setting low speed/M1 0 - 255 141 x

N LASER POWER LOW(M2) Laser power setting low speed/M2 0 - 255 141 x

O LASER POWER LOW(Y1) Laser power setting low speed/Y1 0 - 255 141 x

P LASER POWER LOW(Y2) Laser power setting low speed/Y2 0 - 255 141 x

Q LASER POWER MIDDLE(BW1) Laser power setting middle speed/BW1 0 - 255 110 x

R LASER POWER MIDDLE(BW2) Laser power setting middle speed/BW2 0 - 255 110 x

S LASER POWER LOW(BW1) Laser power setting low speed/BW1 0 - 255 141 x

T LASER POWER LOW(BW2) Laser power setting low speed/BW2 0 - 255 141 x

U LASER DUTY MIDDLE(K) Laser duty selection middle speed/K 0 - 255 0 

V LASER DUTY MIDDLE(C) Laser duty selection middle speed/C 0 - 255 0 

W LASER DUTY MIDDLE(M) Laser duty selection middle speed/M 0 - 255 0 

X LASER DUTY MIDDLE(Y) Laser duty selection middle speed/Y 0 - 255 0 

Y LASER DUTY LOW(K) Laser duty selection low speed/K 0 - 255 0 

Z LASER DUTY LOW(C) Laser duty selection low speed/C 0 - 255 0 

AA LASER DUTY LOW(M) Laser duty selection low speed/M 0 - 255 0 

AB LASER DUTY LOW(Y) Laser duty selection low speed/Y 0 - 255 0 

AC LASER DUTY MIDDLE(BW) Laser duty selection middle speed/BW 0 - 255 0 

AD LASER DUTY LOW(BW) Laser duty selection low speed/BW 0 - 255 0 

AE LASER DUTY MIDDLE(K 1BIT) Laser duty selection middle speed/K* 0 - 255 0 

AF LASER DUTY MIDDLE(C 1BIT) Laser duty selection middle speed/C* 0 - 255 0 

AG LASER DUTY MIDDLE(M 1BIT) Laser duty selection middle speed/M * 0 - 255 0 

AH LASER DUTY MIDDLE(Y 1BIT) Laser duty selection middle speed/Y * 0 - 255 0 

AI LASER DUTY LOW(K 1BIT) Laser duty selection low speed/K * 0 - 255 0 

AJ LASER DUTY LOW(C 1BIT) Laser duty selection low speed/C * 0 - 255 0 

AK LASER DUTY LOW(M 1BIT) Laser duty selection low speed/M * 0 - 255 0 

AL LASER DUTY LOW(Y 1BIT) Laser duty selection low speed/Y * 0 - 255 0 

AM LASER DUTY MIDDLE(BW 1BIT) Laser duty selection middle speed/BW * 0 - 255 0 

AN LASER DUTY LOW(BW 1BIT) Laser duty selection low speed/BW 0 - 255 0 

PR600/FAX