Sharp MX-2314N - Page 235

MX-3114N SIMULATION 6 – 102
61-4
Purpose
Adjustment
Function (Purpose)
Used to print the print image skew adjust-
ment pattern. (LSU unit)
Section
Operation/Procedure
1) Select a target item with scroll key on the touch panel.
2) Enter the print conditions setting value with 10-key.
3) Press [EXECUTE] key.
The print image skew adjustment pattern is printed.
62
62-1
Purpose
Data clear
Function (Purpose)
Used to format the hard disk/SD Card.
(HDD: Excluding the Operation manual and
the watermark data) (SD Card: User data)
Section
Operation/Procedure
1) Press [EXECUTE] key.
2) Press [YES] key.
Used to execute the HDD/SD Card format.
When the operation is completed, [EXECUTE] key returns to the
normal display.
62-2
Purpose
Operation test/check
Function (Purpose)
Used to check read/write of the hard disk
(partial).
Section
Operation/Procedure
1) Press [EXECUTE] key.
2) Press [YES] key.
62-3
Purpose
Operation test/check
Function (Purpose)
Used to check read/write of the hard disk
(all areas).
Section
Operation/Procedure
1) Press [EXECUTE] key.
2) Press [YES] key.
Read/write operations are performed.
PR600/FAX O LASER POWER LOW (Y1) Used to set the laser power (Low speed/Y1) 0 - 255 141 141 ✕
P LASER POWER LOW (Y2) Used to set the laser power (Low speed/Y2) 0 - 255 141 141 ✕
Q LASER POWER MIDDLE (BW1) Used to set the laser power (Middle speed/BW1) 0 - 255 110 148 ✕
R LASER POWER MIDDLE (BW2) Used to set the laser power (Middle speed/BW2) 0 - 255 110 148 ✕
S LASER POWER LOW (BW1) Used to set the laser power (Low speed/BW1) 0 - 255 141 141 ✕
T LASER POWER LOW (BW2) Used to set the laser power (Low speed/BW2) 0 - 255 141 141 ✕
U LASER DUTY MIDDLE (K) Laser DUTY select middle speed (K) 0 - 255 0 0 
V LASER DUTY MIDDLE (C) Laser DUTY select middle speed (C) 0 - 255 0 0 
W LASER DUTY MIDDLE (M) Laser DUTY select middle speed (M) 0 - 255 0 0 
X LASER DUTY MIDDLE (Y) Laser DUTY select middle speed (Y) 0 - 255 0 0 
Y LASER DUTY LOW (K) Laser DUTY select low speed (K) 0 - 255 0 0 
Z LASER DUTY LOW (C) Laser DUTY select low speed (C) 0 - 255 0 0 
AA LASER DUTY LOW (M) Laser DUTY select low speed (M) 0 - 255 0 0 
AB LASER DUTY LOW (Y) Laser DUTY select low speed (Y) 0 - 255 0 0 
AC LASER DUTY MIDDLE (BW) Laser DUTY select middle speed (BW) 0 - 255 0 0 
AD LASER DUTY LOW (BW) Laser DUTY select low speed (BW) 0 - 255 0 0 
AE LASER DUTY MIDDLE (K 1BIT) Laser DUTY select middle speed (K) 0 - 255 0 0 
AF LASER DUTY MIDDLE (C 1BIT) Laser DUTY select middle speed (C) 0 - 255 0 0 
AG LASER DUTY MIDDLE (M 1BIT) Laser DUTY select middle speed (M) 0 - 255 0 0 
AH LASER DUTY MIDDLE (Y 1BIT) Laser DUTY select middle speed (Y) 0 - 255 0 0 
AI LASER DUTY LOW (K 1BIT) Laser DUTY select low speed (K) 0 - 255 0 0 
AJ LASER DUTY LOW (C 1BIT) Laser DUTY select low speed (C) 0 - 255 0 0 
AK LASER DUTY LOW (M 1BIT) Laser DUTY select low speed (M) 0 - 255 0 0 
AL LASER DUTY LOW (Y 1BIT) Laser DUTY select low speed (Y) 0 - 255 0 0 
AM LASER DUTY MIDDLE (BW 1BIT) Laser DUTY select middle speed (BW) 0 - 255 0 0 
AN LASER DUTY LOW (BW 1BIT) Laser DUTY select low speed (BW) 0 - 255 0 0 
Mode Item/Display Content
Setting
range
Default value
Destination
linkage
26cpm
machine
31cpm
machine
Item/Display Content
Default
value
A MULTICOUNT Print quantity (1-999) 1
B PAPER MFT Tray
selection
1 Manual paper feed 2
(Paper
feed tray
1)
CS1 2 Paper feed tray 1
CS2 3 Paper feed tray 2
CS3 4 Paper feed tray 3
CS4 5 Paper feed tray 4
LCC 6 LCC