MX-3114N DISASSEMBLY AND ASSEMBLY 10 – 54
(2) Fusing unit(26cpm/31cpm machine) a. Lower separation pawl, Lower separation pawl spring
1) Open the fusing rear lower PG unit, and remove the fusing
cover.
When removing the fusing cover, lift the pawl section with a
screwdriver (-) and remove.
2) Remove the fusing rear lower PG unit.
When removing, be careful not to lose the spring.
When attaching, check to confirm that the spring hook is
engaged.
No. Name
1 Lower separation pawl
2 Lower separation pawl spring
3 Separation plate
4 Web guide shaft
5 Web pressure roller bearing
6 Web pressure roller
7 Web roller
8 Lower thermistor
9 Pressure roller gear
10 Pressure roller gear bearing
11 Pressure roller
12 Sub thermistor
13 Fusing roller bearing
14 Insulation bush
15 Heating roller bearing
16 Meandering suppress collar
17 Fusing roller
18 Heating roller
19 Fusing belt
20 Washer
11
10
12
17
19
18
13
15
20
16
14
9
8
10
13
14
16
20
15
1
2
1
5
6
7
2
4
5
4
3
To Next Page
Loading...
