Sharp MX-2314N - Page 401

MX-3114N DISASSEMBLY AND ASSEMBLY 10 – 55
3) Remove the fusing cover.
4) Remove the lower separation pawl and the lower separation
pawl spring from the paper guide.
When assembling, check to confirm that the hook of the lower
separation pawl spring is engaged.
b. Separation plate
1) Remove the paper guide.
After installing the separation plate and the paper guide, manu-
ally move the separation plate to check the operation.
2) Remove the spring, and slide it to the front side, and remove
the separation plate.
Be careful not to damage or scratch the separation plate sur-
face.
3) Remove the holder, from the separation plate.
1
1
2
1
2
1
2
1
2
1
2
1
2
1
1
1
2
1
2
1
2
3