Sharp MX-2314N - Page 481

MX-3114N OPERATIONAL DESCRIPTIONS 13 – 61
C. Maintenance system counters (Number of rotations)
Counter name Count-up timing
Display
SIM
Reset
SIM
Count-up number
Simplex surface
print
Duplex surface print
Paper feed tray -
Paper exit
completed
Paper feed tray -
ADU paper entry
completed
ADU paper feed -
Paper exit
completed
Small
size
Large
size
Small
size
Large
size
Small
size
Large
size
Fusing belt accumulated
rotation time
While the fusing motor is
driven.
SIM22-13 SIM24-4 RPM (Unit: 1)
* Calculated from the traveling distance.
Fusing roller accumulated
rotation time
While the fusing motor is
driven.
Pressure roller accumulated
rotation time
While the fusing motor is
driven.
Separation pawl accumulated
rotation time
While the fusing motor is
driven.
Separation plate accumulated
rotation time
While the fusing motor is
driven.
Primary transfer unit
accumulated rotation time
While the primary transfer unit
is driven.
Transfer blade accumulated
rotation time
While the drum (K) is driven.
PTC accumulated rotation time While the drum (K) is driven.
Secondary transfer unit
accumulated rotation time
While the secondary transfer
unit is driven
Developer cartridge
accumulated rotation time (K)
While the drum (K) is driven. SIM22-13 SIM24-5
SIM25-2
Developer cartridge
accumulated rotation time (C)
While the drum (C) is driven.
Developer cartridge
accumulated rotation time (M)
While the drum (M) is driven.
Developer cartridge
accumulated rotation time (Y)
While the drum (Y) is driven.
Drum cartridge accumulated
rotation time (K)
While the drum (K) is driven. SIM22-13 SIM24-4
Drum cartridge accumulated
rotation time (C)
While the drum (C) is driven.
Drum cartridge accumulated
rotation time (M)
While the drum (M) is driven.
Drum cartridge accumulated
rotation time (Y)
While the drum (Y) is driven.
Main charger accumulated
rotation time (K)
While the drum (K) is driven.
Main charger accumulated
rotation time (C)
While the drum (C) is driven.
Main charger accumulated
rotation time (M)
While the drum (M) is driven.
Main charger accumulated
rotation time (Y)
While the drum (Y) is driven.
Drum blade accumulated
rotation time (K)
While the drum (K) is driven.
Drum blade accumulated
rotation time (C)
While the drum (C) is driven.
Drum blade accumulated
rotation time (M)
While the drum (M) is driven.
Drum blade accumulated
rotation time (Y)
While the drum (Y) is driven.
Toner motor accumulated
rotation time (K)
While the toner motor (K) is
driven.
SIM22-13 – RPM (Unit: 1)
* Calculated from the rotating time.
Toner motor accumulated
rotation time (C)
While the toner motor (C) is
driven.
Toner motor accumulated
rotation time (M)
While the toner motor (M) is
driven.
Toner motor accumulated
rotation time (Y)
While the toner motor (Y) is
driven.