1-98
BEFORE USING THE MACHINE►PERIPHERAL DEVICES
INNER FINISHER MAINTENANCE
When the staple cartridge runs out of staples, a message will appear in the operation panel. Follow the operation
procedure to replace the staple cartridge.
Replacement the staple cartridge
1
Open the finisher front cover.
2
Gently slide the finisher until it stops.
Lower the staple case release lever
and remove the staple case.
Pull the staple case out to the right.
3
Remove the empty staple cartridge
from the staple case.
4
Insert a new staple cartridge into the
staple case as shown.
Push the staple cartridge in until it clicks into place.
5
Replace the staple case.
Push the staple case in until it clicks into place.
To Next Page
Loading...
