7-162
SYSTEM SETTINGS►SYSTEM SETTINGS
Common Functions
Auto Colour Calibration (for Copy)
Auto Colour Calibration
Copy Calibration by Screen
Printer Calibration by Screen
Performs automatic color correction when the color is off.
The machine prints a test patch, the test patch is scanned, and the color is automatically corrected.
After the [Execute] key is tapped and a test patch is printed, a message appears prompting you to begin automatic
calibration.
Density Smoothing Adjustment
After the [Execute] key is tapped and a test patch is printed, a message appears prompting you to begin automatic
calibration.
Remove Toner Cartridge
• Before executing Auto Color Calibration, check to see if the registration adjustment is correct.
If the registration adjustment is not correct, perform "Registration Adjustment."
• If the color is still off after performing Auto Color Calibration, repeating Auto Color Calibration once again may improve the
color.
To Next Page
Loading...
