1-101
BEFORE USING THE MACHINE►PERIPHERAL DEVICES
SUPPLIES
The finisher (large stacker) requires the following staple cartridge:
Staple cartridge (approx. 5000 staples per cartridge x three cartridges)
MX-SCX1
FINISHER MAINTENANCE
When the staple cartridge runs out of staples, a message will appear in the operation panel. Follow the operation
procedure to replace the staple cartridge.
Replacement the staple cartridge
1
Open the front cover.
2
Push the staple unit back in.
3
Use this lever to remove the staple
case.
To Next Page
Loading...
