Sharp MX-3070N

1-29
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
AS SOON AS THE REMOTE JOB IS FINISHED, ENTER
AUTO POWER SHUT OFF MODE
Printing or outputting received fax data in Auto Power Shut-Off Timer turns on the power, and then the machine returns
to Auto Power Shut-Off Timer immediately after completing the print job.
ECO SCAN
Non-print jobs such as sending a scanned original are performed with the fusing unit turned off.
To set "As soon as the remote job is finished, enter Auto power shut off mode.":
In "Setting mode (administrator)", select [System Settings] → [Energy Save] → [Eco Mode Settings] → [As soon as the
remote job is finished, enter Auto power shut off mode.]
To set Eco scan:
"Setting mode (administrator)" → select [System Settings] → [Energy Save] → [Eco Mode Settings] → [Eco Scan Setting] .
1
0
0
H
0
Printed
Auto power shut off
mode
Print
Auto power shut off
mode
Fusing unit is turned
off
Fusing unit is turned
on
Fusing unit is turned
off
1
0
0
0
H
Fusing unit is
turned off
Image Send
Document Filing
Copy
Fusing unit is
turned on
Fusing unit is
turned off
Print
Auto power
shut off mode