7-5
SYSTEM SETTINGS►USER CONTROL
SETTING MODE LIST
The following is a list of setting mode items, factory default settings and restrictions for each item.
Status
U: General user; A: System administrator/Administrator
* Some settings can only be configured by the administrator.
Address Book
U: General user; A: System administrator/Administrator
Document Operations
U: General user; A: System administrator/Administrator
SETTING MODE LIST
• Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings.
• Some setting items can only be configured on the Web page.
Setup Items Factory default setting U A
■ STATUS (page 7-43)
● Machine Identification (page 7-43) – Yes
*
Yes
● Total Count (page 7-44) – Yes Yes
● Device Status (page 7-44) – Yes Yes
● Network Status (page 7-45) – Yes Yes
● Firmware Version (page 7-46) – Yes Yes
● Power Reset (page 7-46) – No Yes
● Data List (page 7-46) – Yes Yes
X List for User – Yes Yes
X List for Administrator – No Yes
Setup Items Factory default setting U A
■ ADDRESS BOOK (page 7-48)
● ADDRESS BOOK (page 7-48) – Yes Yes
● Category Setting (page 7-50) – Yes Yes
Setup Items Factory default setting U A
■ DOCUMENT OPERATIONS (page 7-51)
● HDD File retrieve (page 7-51) Yes Yes
To Next Page
Loading...
