4-71
FACSIMILE►OTHERS FUNCTION
SENDING BOTH SIDES OF A CARD AS A SINGLE PAGE
(CARD SHOT)
Send the front and reverse sides of a card as a single page, without the need to send each side separately.
When using this function, the original must be placed on the document glass.
• If the original size is larger than the send size, it will result in a sending failure. Check the original size once more, and
specify it again.
• The ratio cannot be specified and "Rotation Sending Setting" cannot be selected.
• This function cannot be used in direct transmission mode or when the speaker is used to dial.
1
Place a card face down on the
document glass.
► DOCUMENT GLASS (page 1-69)
2
Enter the destination fax number.
• Entering a destination number using the numeric keys►page 4-11
• Retrieving a destination from an address book►page 4-12
• Using a search number to retrieve a destination►page 4-15
• Retrieving a destination from a global address book►page 4-16
• Using a transmission log to resend►page 4-18
3
Tap the [Detail] key to change to normal mode.
► Changing mode from each mode (page 4-8)
Transmitted image
Originals
Front
Send
Example of an 8-1/2" x 11" (A4) size portrait
scan transmission
Example of an 8-1/2" x 11" (A4) size landscape
scan transmission
Back
To Next Page
Loading...
