Sharp MX-3070N

2-40
COPIER►BASIC PROCEDURE FOR MAKING COPIES
SPECIFYING A TYPE AND SIZE OF PAPER LOADED ON
BYPASS TRAY
1
Tap the [Detail] key to change to normal mode.
► Changing mode from each mode (page 2-5)
2
Tap the [Paper Select] key, and tap the bypass tray key.
► SELECTING THE PAPER TRAY FOR COPYING (page 2-13)
You can also call the [Paper Select] screen by tapping the machine image on the base screen.
3
Tap the [Type and Size] key, and tap the key that meets the type of the loaded
paper.
4
Tap the [Size] tab, and tap the key that
meets the size of the loaded paper.
• [Auto-AB] key:
Automatically detects the appropriate AB paper size when
loading paper such as A4 or B5.
• [Auto-Inch] key
Automatically detects the appropriate inch paper size
when loading paper such as 8-1/2"x11".
• [Size Set] key:
Tap this key to manually specify the paper size that is not
detected automatically.
• [Direct Entry] key:
Tap this key to enter a numeric value for the size of the
loaded paper.
After the settings are completed, tap .
To directly enter a paper size
Tap the [Inch] key to set a paper size in inches, or tap the [AB] key to set it in millimeters.
After you have entered the paper size using the key, tap the [OK] key.
Preview
Start
Paper Select
Others
No. of copies
Shift Position to Have Margin
Copy Ratio
Enlarge/Reduce Copy
Margin Shift
Change Size/Direction.
Original
2-Sided Copy
Color
Start
1
Type: Plain Size: Auto-Inch
Auto-AB
Type/Size of Bypass
Auto-Inch
Size Set
Direct Entry
Auto-AB
Auto-Inch
12x18(A3W),11x17, 8½ x14,8½ x11,
8½ x11R,5½ x 8½R,7½ x 10½ R,A3,A4,
B4,B5,320x450,225x320
CA
B/W
4 11x17
A3W(12x18),A3,A4,A4R,A5R,B4,B5,
B5R,11x17,8½ x11,320x450,225x320
Preview
Start
Paper Select
Others
No. of copies
Shift Position to Have Margin
Copy Ratio
Enlarge/Reduce Copy
Margin Shift
Change Size/Direction.
Original
2-Sided Copy
Color
Start
1
Direct Entry
Execute
inchAB
X11 Y17 X11 Y17
X11 Y17 X11 Y17
X11 Y17
X11 Y17
X11 Y17
Y
X
CA
B/W
17
(3 5/8 ~12 1...
inch
(1 ~ 17)
inch
11
4 11x17