7-166
SYSTEM SETTINGS►SETTING MODE FOR FAX
Speaker Settings
Use these settings to set the sound heard from the speaker for the Speaker, Ringer Volume, Line Monitor, Fax Receive
Complete Signal, Fax Send Complete Signal, and Fax Communication Error Signal. For the Fax Receive Complete
Signal, the Fax Send Complete Signal, and the Fax Communication Error Signal, the Tone Pattern and Transmission
Complete Sound Time Setting can be selected in addition to the volume.
Check on Setup Sounds
Checks the selected tone pattern and volume.
Remote Reception Number Setting
You can set the machine to the fax reception mode by entering a one-digit number from the connected extension
telephone and by tapping the key. This one-digit number is called the Remote Reception number, and it can be
between 0 and 9.
Connecting Optional Receiver
External Telephone Setting
Tel/Fax Auto Change
Enable Auto Change
Number of Ringer Reception
Select Response Message
Original Print on Transaction Report
• Always Print
• Print at Error
• Do not Print
This setting will not be effective if the next "Activity Report Print Select Setting (page 7-167)
" setting is set to "Do not
Print".
To Next Page
Loading...
