2-129
COPIER►OTHER FUNCTIONS
ADJUSTING THE COLOR (COLOR BALANCE)
You can adjust the color, tone, and density of copies.
Use the [Color] tab for color copy settings, or the [B/W] tab for black & white copy settings.
If you select the [Color] tab, each of the colors yellow, magenta, cyan, and black are divided into three gradations from
light to dark, allowing you to adjust the average density of each gradation.
As necessary, it collectively adjusts all eight gradations.
Color Balance must be specified before scanning the original.
To change the default color balance setting:
Change the setting in "Setting mode (administrator)" → [System Settings] → [Image Quality Adjustment] →
[Copy Image Quality]→ [Color Balance(Color)] or [Color Balance(Black & White)].
1
Tap the [Others] key, and tap the [Color Balance] key.
2
Tap the tab of the color you want to adjust.
C Cyan+
Y Yellow+
Bk Black+
M Magenta+
To Next Page
Loading...
