Sharp MX-3070N

2-17
COPIER►BASIC PROCEDURE FOR MAKING COPIES
AUTOMATIC 2-SIDED COPYING
USING THE AUTOMATIC DOCUMENT FEEDER FOR
2-SIDED COPYING
• To make 2-sided copies, configure the 2-sided copy settings before scanning the original.
• Dual-side copy helps to save paper.
1
Place the original in the document feeder tray of the automatic document
feeder.
► AUTOMATIC DOCUMENT FEEDER (page 1-67)
2
Tap the [2-Sided Copy] key.
► COPYING SEQUENCE (page 2-7)
3
Select 2-sided copy mode.
(1) Select the 2-sided copy type.
(2) When the original is set to "2-sided", select "Tablet" or
"Book" in "Original Binding".
(3) When the output is set to "2-sided", select "Tablet" or
"Book" in "Output Binding".
After the settings are completed, tap .
4
Check the paper (tray) and color mode you want to use for copying, and tap
the keys for any other settings you want to select.
• Paper Select►page 2-13
• Copy Ratio►page 2-26
• Staple/ Punch ►page 2-42, ►page 2-45
• Color Mode►page 2-20
•Orientation►page 2-33
• Exposure►page 2-23
•N-Up►page 2-49
• Card Shot►page 2-52
Originals Copies
Automatic 2-sided copying of
1-sided originals
Originals Copies Originals Copies
Automatic 2-sided copying of
2-sided originals
1-sided copying of 2-sided
originals
CA
Preview
B/W
Start
Color
Start
Copies
2-Sided Copy
Original Binding Output Binding
Tablet
1 → 2
TabletBookBook
2 → 12 → 21 → 1
(1)
(2)
(3)
(4)