7-165
SYSTEM SETTINGS►SETTING MODE FOR FAX
Image Send Settings
Fax Settings
You can select the image send settings of fax functions.
Default Settings
The fax settings can be enabled or disabled to suit the needs of your workplace.
Resolution Setting
Apply the Resolution Set when Stored
Dial Mode Setting
Select the appropriate setting for your telephone line type.
Dial Mode Setting
Select the line type from the list.
Auto Select
Select this after the line has been connected to have the machine automatically detect whether your line is a pulse dial
line or a tone dial line.
Auto Wake Up Print
When the [Power] button is "Off" (but the main power switch is "") and a fax is received, this function activates the machine
and prints the fax.
When this function is disabled, received faxes are not printed until the [Power] button is switched "On".
Pause Time Setting
Changes the length of pauses inserted in fax numbers.
If a hyphen (-) is entered when dialing or storing a fax number, a pause of 2 seconds is inserted.
It can be set between 1 and 15 seconds, in every 1 seconds.
Fax Dest. Confirmation Mode
This setting specifies whether or not a destination verification message is displayed when sending a fax in order to
prevent accidental transmission to the wrong destination.
• Allow/Reject Number Setting All Invalid No Yes
• Reject Unknown Calls Disable No Yes
Fax Polling Security No Yes
• Set Fax Polling Security Active No Yes
F-Code Memory Box – Yes Yes
● Fax Data Receive/Forward (Manual) (page 7-173) Yes Yes
X Fax Settings Yes Yes
Receive Setting Auto Reception Yes Yes
Multiple Set Print Disable Yes Yes
Staple
*1
Disable Yes Yes
Forward Received Data – Yes Yes
Setup Items Factory default setting U A
To Next Page
Loading...
